Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Viewing traffic details on an interface

Hi,

I need more details of what is going over my serial interface on my router. I cant remember what the command is to enable logging on an interface so it grabs which protocols are going through it. Can anyone help?

thanks

Mick

4 REPLIES

Re: Viewing traffic details on an interface

Mick,

You need to use ip nbar protocol-discovery command on the interface for getting the protocol statistic

you can also configure netflow globally and use the command ip route-cache flow under the interfaces and use either netqos or netflow analyser to analyse the traffic flow

HTH, rate if it does

Narayan

New Member

Re: Viewing traffic details on an interface

netflow! thats the one cheers mate.

Mick

Cisco Employee

Re: Viewing traffic details on an interface

Hello Mick,

Which router do you have and what is the IOS you are running on it.

Try enabling " ip accounting " on the serial interface and should show you the desired results.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_command_reference_chapter09186a008017d169.html#wp1091971

If you want granular reports, check the netflow support on your routers which will list all the top talkers along with the protocol being used.

HTH,

-amit singh

New Member

Re: Viewing traffic details on an interface

thank you mate.

I have a cisco 3825 running IOS 12.4

102
Views
10
Helpful
4
Replies