11-05-2009 07:35 AM - edited 03-06-2019 08:27 AM
Is it possible to create a virtual port channel between two Nexus 7000 switches and 2 3750 switches in a stack?
I would have 1 link from Nexus 7000 switch 1 to switch 1 in 3750 stack.
Link two from Nexus 700 switch2 to switch 2 in 3750 stack.
Many Thanks
Darren
11-05-2009 08:01 AM
Hi Darren,
Yes, since you are connecting your 7000 to 2 different 3750s to create an EtherChannel, it is called Multichassis EtherChannel (MEC). The only limitation is that you have to use LACP, because PAGP is not supported in MEC yet.
HTH
Reza
11-05-2009 08:27 AM
Thanks. I presume if I wanted to do the same with two 6500 switches we would need to upgrade to VSS?
11-05-2009 08:33 AM
Correct, VSS converts 2 physical boxes into one logical device.
Here is more info on VSS:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: