WIndows Vista will not get an IP address from the Cisco 3560 DHCP. I have tried two NICs. Windows XP works fine and Linux has no problem getting an address from the 3560. If I change the port to a different vlan that has a linux DHCP server I have no problems either.
DHCP is not static. I have tried a static IP for the network and the machine is on the network fine but then set Vista to get its IP dynamically and I get no IP. Some testing shows that the router assigns an IP for my mac but Vista does not receive it.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...