Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VLAN Bridge (fallback bridge) support on 4507R switch

Dear Gaurav and team,

After we delivered and installed the core 4507R, found that the internal lan running main frame ibm with the PC software SNA type software to take the printout from the mainframe console.

I opened the TAC case and TAC engineer told that this switch does't not support fallback bridge feature for the non-ip traffic.Then i replaced 4507R with 3560 L3 switch and the PC communications software works fine.

Could u help me with the work around to use the 4507R switch in place of 3560 in order to support the PC comm SNA applications.

What about ethertype access-list.

Please come with solutions for this issue.

Thanks

swami

2 REPLIES
Silver

Re: VLAN Bridge (fallback bridge) support on 4507R switch

4500 does not support bridging. try with 3550, Here is the config guide for the 3550 and bridging-

http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225sec/3550scg/swfallbk.htm#

New Member

Re: VLAN Bridge (fallback bridge) support on 4507R switch

Mahbub,

I already replaced it with 3560 and working with SNA app. I want to know that is there any way to make use of 4507R switch to support SNA IBM app of PC software.

Thanks

156
Views
0
Helpful
2
Replies