05-11-2007 01:47 AM - edited 03-05-2019 04:00 PM
hello i'm a bigginer on cisco world.
i don't know how to configure a vlan by subnetwork without associating a specifique switchports to vlan on catalyst 4503.
pls help.
05-11-2007 01:54 AM
Hi King,
Without assigning vlan to a switchport how can switch port belongs to a particular vlan.
Below link is useful.
http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/7.1/quick/software/guide/vlans.html
Thanks,
Satish
05-11-2007 02:18 AM
i want that i have pc with a static ip addres belongs to a vlan X at any switchport.
05-11-2007 02:21 AM
Hi King ,
Vlan1 is default one and no need to configure it for each and every port on switch.Create vlan1 and check it out.
Thanks,
Satish
05-11-2007 02:35 AM
yes , but i want create another vlans.and if i connect a pc to port, his ip address hwo decide for which vlan it belongs.
that i don't want to specify for each vlan his switchports.
i want that any switchport will belongs to any vlan.
05-11-2007 03:10 AM
Use the link below for configuring vlans on the switch.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_2_31a/config/vlans.htm
You can create multiple vlans on the switch and assign the ports to it. Create L3 interface for each vlan and use the same range of ip address for the hosts and the gateway for vlan will the IP address of L3 interface.
HTH
-amit singh
05-11-2007 03:09 AM
i want that i have pc with a static ip addres belongs to a vlan X at any switchport.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: