07-17-2012 09:59 AM - edited 03-07-2019 07:49 AM
Hi All,
I am trying to create an anotherb Vlan 97 on cisco WS-C3548-XL but unable to made up the vlan interface .
S35_PKS_A32#sh vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active
5 Admin active
27 VLAN0027 active
32 VLAN0032 active Fa0/13, Fa0/25
33 VLAN0033 active Fa0/8, Fa0/14, Fa0/27, Fa0/37,
Fa0/38, Fa0/42
36 VLAN0036 active
37 VLAN0037 active Fa0/1, Fa0/2, Fa0/3, Fa0/4,
Fa0/7, Fa0/9, Fa0/10, Fa0/12,
Fa0/16, Fa0/18, Fa0/19, Fa0/20,
Fa0/21, Fa0/22, Fa0/26, Fa0/29,
Fa0/30, Fa0/31, Fa0/33, Fa0/34,
Fa0/36, Fa0/43, Fa0/44, Fa0/45,
Fa0/46, Fa0/47, Fa0/48
39 VLAN0039 active Fa0/5, Fa0/15, Fa0/23, Fa0/24,
Fa0/32, Fa0/39, Fa0/40
40 VLAN0040 active Fa0/11, Fa0/28
41 VLAN0041 active
44 VLAN0044 active
47 VLAN0047 active
48 VLAN0048 active
50 VLAN0050 active
54 VLAN0054 active Fa0/41
57 VLAN0057 active
60 VLAN0060 active
65 VLAN0065 active
66 VLAN0066 active
96 VLAN0096 active
97 VLAN0097 active
104 VLAN0104 active Fa0/17
130 VLAN0130 active Fa0/6, Fa0/35
323 VLAN0323 active
500 VLAN0500 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
27 enet 100027 1500 - - - - - 0 0
32 enet 100032 1500 - - - - - 0 0
33 enet 100033 1500 - - - - - 0 0
36 enet 100036 1500 - - - - - 0 0
37 enet 100037 1500 - - - - - 0 0
39 enet 100039 1500 - - - - - 0 0
40 enet 100040 1500 - - - - - 0 0
41 enet 100041 1500 - - - - - 0 0
44 enet 100044 1500 - - - - - 0 0
47 enet 100047 1500 - - - - - 0 0
48 enet 100048 1500 - - - - - 0 0
50 enet 100050 1500 - - - - - 0 0
54 enet 100054 1500 - - - - - 0 0
57 enet 100057 1500 - - - - - 0 0
60 enet 100060 1500 - - - - - 0 0
65 enet 100065 1500 - - - - - 0 0
66 enet 100066 1500 - - - - - 0 0
96 enet 100096 1500 - - - - - 0 0
97 enet 100097 1500 - - - - - 0 0
104 enet 100104 1500 - - - - - 0 0
130 enet 100130 1500 - - - - - 0 0
323 enet 100323 1500 - - - - - 0 0
500 enet 100500 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0
S35_PKS_A32#
S35_PKS_A32#sh run int vlaN 97
Building configuration...
Current configuration:
!
interface VLAN97
ip address 172.23.21.8 255.255.255.0
no ip directed-broadcast
no ip route-cache
shutdown
end
S35_PKS_A32#sh int vlaN 97
VLAN97 is administratively down, line protocol is down
Hardware is CPU Interface, address is 0008.a31c.f180 (bia 0008.a31c.f180)
Internet address is 172.23.21.8/24
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
ARP type: ARPA, ARP Timeout 04:00:00
S35_PKS_A32#
Pls. help me to made it up the vlan port
Version:
Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC3b, RELEASE SOFTWA
RE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 15-Feb-02 10:51 by antonino
Image text-base: 0x00003000, data-base: 0x00337600
ROM: Bootstrap program is C3500XL boot loader
S35_PKS_A32 uptime is 18 minutes
System returned to ROM by reload
System image file is "flash:c3500XL-c3h2s-mz.120-5.WC3b.bin"
cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes
of memory.
Processor board ID FOC0602S04L, with hardware revision 0x00
Last reset from warm-reset
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:08:A3:1C:F1:80
Motherboard assembly number: 73-3903-11
Power supply part number: 34-0971-02
Motherboard serial number: FOC06010056
Power supply serial number: APQ05430BJB
Model revision number: N0
Motherboard revision number: B0
Model number: WS-C3548-XL-EN
System serial number: FOC0602S04L
Configuration register is 0xF
S35_PKS_A32#
S35_PKS_A32#
Solved! Go to Solution.
07-17-2012 04:36 PM
Hey Leo,
Many a good tune out of an old fiddle.
Sanjeev
Here the config guide
http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/release12.0_5_wc3/swg/sc.html
These old switches are NOT routers
They only support ONE interface Vlan which is use for management, remote telnet etc.
Regards,
Alex.
Please rate useful posts.
07-17-2012 03:00 PM
What error message did you get when you tried "no shut" under int vlan 97
Siddhartha
07-17-2012 03:26 PM
Wow. Your switch is 10 years old and running an equally 10-year-old IOS.
07-17-2012 04:36 PM
Hey Leo,
Many a good tune out of an old fiddle.
Sanjeev
Here the config guide
http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/release12.0_5_wc3/swg/sc.html
These old switches are NOT routers
They only support ONE interface Vlan which is use for management, remote telnet etc.
Regards,
Alex.
Please rate useful posts.
07-17-2012 06:55 PM
You are getting a layer 2 vlan and a layer 3 svi mixed up . As previous poster said this is a layer 2 switch only so the only reason to have an SVI defined is to manage the switch. I'm assuming it already has a l3 SVI to manage it so I would leave that alone and delete the layer 3 svi for vlan 97. Seeing that there are so many vlans on the switch that means you have a trunked link somewhere to the L3 device which does the routing . You already have a L2 vlan defined for vlan 97 as shown in the show vlan command so you should be set to go . If you need routing for this subnet it is done on another device that is attached via a trunk .
07-18-2012 12:30 AM
Thanks All for the clear Information. Need some replacement.
Reg
Sanjeev
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: