Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VLAN creation

I have a 1841 router and I want to create a VLAN with the ID 2002.

I use an IOS that supports extended VLAN, but when I try to create the VLAN, the command "vlan id" doesn't work.

9 REPLIES

Re: VLAN creation

Hi

I think u have to create it in the vlan-database.

router#vlan database

vtp transparent

vlan 2002 name ()

Thanks

Mahmood

New Member

Re: VLAN creation

In the VLAN database I'm limitated to the id <1-1005>.

Re: VLAN creation

Hi

try it in global mode but u r VTP mode should be transparent.

Thanks

Mahmood

New Member

Re: VLAN creation

The VTP is already configured in trasparent mode but I can't find the command to create the VLAN in global mode.

As I said, the command "vlan id" doesn't work.

Re: VLAN creation

have you enable the Extended System ID ?

if not try enableing it and check.

You should be aware of the network before dooing so.

let me know if that works

New Member

Re: VLAN creation

I tried the command "spanning-tree extend system-id" but the command is unknown.

Re: VLAN creation

can you provide me the ios verison and feture set information

New Member

Re: VLAN creation

I was using the IOS c1841-advipservicesk9-mz.12.4-11.XW2 and I just change to IOS c1841-advipservicesk9-mz.12.4-11.XJ4.

Now it is working.

I compared the fonctionnalities of the two IOS and the one that doesn't work has all the fonctionnalities of the one that is working.

Has anyone an explanation?

Re: VLAN creation

I would not able to go indepth with the ios.

The only thing i can say is the feature set.

Well let me tell u one more thing there some ios feature set does not support radius server you need to change the fetureset of the ios verion to get this command working.

thats nice to know that it working.

208
Views
0
Helpful
9
Replies
CreatePlease login to create content