I've set up a new Vlan (see config attached) called vlan191. I've created a tunnel to route traffic on this vlan to another router. i've mirrored the set up from other vlans but it still doesnt come up. Could someone have a look at the config and let me know their thoughts. I've connected another route to this switch on port 6/47 but don't think i've the correct config there. Thats a side issue.
A couple of things to check. Have you created vlan 191 in vlan database. One of the reasons why a vlan interface remains down is if there are no active ports assigned to vlan 191 (or) an active trunk in which vlan 191 mayn't be allowed or active.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...