01-16-2007 01:59 PM - edited 03-05-2019 01:48 PM
Hi,
I've set up a new Vlan (see config attached) called vlan191. I've created a tunnel to route traffic on this vlan to another router. i've mirrored the set up from other vlans but it still doesnt come up. Could someone have a look at the config and let me know their thoughts. I've connected another route to this switch on port 6/47 but don't think i've the correct config there. Thats a side issue.
Thanks Guys.
01-16-2007 02:08 PM
Robert,
A couple of things to check. Have you created vlan 191 in vlan database. One of the reasons why a vlan interface remains down is if there are no active ports assigned to vlan 191 (or) an active trunk in which vlan 191 mayn't be allowed or active.
HTH,
Sundar
01-16-2007 02:53 PM
Yes - that helped.
I had to add the 191 vlan to all the trunk links that brought it up.
Thanks alot.
Rob.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: