lan1 is 192.168.0.0/24 with a dhcp server on 192.168.0.8 (GW 192.168.0.1)..no vlan set
All of the stuff i am describing below is working without vlan (if i attach a switch on the pfsesne lan side and make test with access point connected to it)..
I have to use vlan to add another dhcp server (the pfsense server) on my network.
I wanna make another wireless lan access to internet but not to lan1..so the wan on pfsense belong to my default lan.
I ve got pfsense on a basic computer with 2 nics:
- 1 NIC for the the pfsense lan side (with dhcp (192.168.10.0/23 start at 192.168.10.11),firewall rules..squid and radius server)..connect to a port which is vlan 40 (let say) and wireless access point belong to vlan 40 as well and configured for radius access.
- 1 NIC (192.168.0.49/24)for the wan pfsense side (which is actually belonging to my lan..see above) belonging to the default vlan..should be vlan 1.
The question is : does 2 NICS on a same computer and not belonging to the same vlan are making automatically intervlan or not ?
in another word, does a wireless client let say 192.168.11.10 will have access to the GW which is on default vlan (192.168.0.1) (without speaking about firewall rules).
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.