Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

vlan problem catalyst

Hello I have a message error can anyone help me?

What is that: Local updater ID is 10.X.X.254 on interface Vl1 (lowest numbered VLAN interface found)

(config)#vlan 200           

(config-vlan)#name PRUEBA

(config-vlan)#exit

% Applying VLAN changes may take few minutes.  Please wait...

VLAN 1003 parent VLAN missing

APPLY VLAN changes failed

sh vtp status

VTP Version                     : 3 (capable)

Configuration Revision          : 172

Maximum VLANs supported locally : 1005

Number of existing VLANs        : 54

VTP Operating Mode              : Server

VTP Domain Name                 : XYZ

VTP Pruning Mode                : Enabled (Operationally Enabled)

VTP V2 Mode                     : Enabled

VTP Traps Generation            : Disabled

MD5 digest                      : 0xCB 0xFF 0x6F 0x28 0xA6 0x8D 0x25 0x9E

Configuration last modified by 10.40.100.238 at 11-22-11 16:18:53

Local updater ID is 10.X.X.254 on interface Vl1 (lowest numbered VLAN interface found)

VTP version running             : 2

sh version

Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICES_WAN-M), Version 12.2(33)SXI5, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Sat 23-Oct-10 01:30 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX6, RELEASE SOFTWARE (fc1)

System image file is "sup-bootdisk:s72033-ipservices_wan-mz.122-33.SXI5.bin"

Last reload reason: VSLP HA role change from active to standby

cisco WS-C6509-E (R7000) processor (revision 1.5) with 983008K/65536K bytes of memory.

SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache

Last reset from s/w reset

45 Virtual Ethernet interfaces

54 Gigabit Ethernet interfaces

20 Ten Gigabit Ethernet interfaces

1917K bytes of non-volatile configuration memory.

8192K bytes of packet buffer memory.

Thanks,

Everyone's tags (1)
3 REPLIES
New Member

Re: vlan problem catalyst

Hi,

Vlan 1003 is a default tokenring vlan. And therefore can not be used.

Hope this helped

Sent from Cisco Technical Support iPhone App

New Member

Re: vlan problem catalyst

Thank Bart for this information but I tried to create vlan 200 do not 1003. any idea?

Best Regards.

Santiago

New Member

Re: vlan problem catalyst

Oke sorry i misunderstood. You might want to reffer to this, it is similar to your problem.

https://supportforums.cisco.com/thread/2027277

Good luck!

Sent from Cisco Technical Support iPhone App

320
Views
0
Helpful
3
Replies
CreatePlease to create content