Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VLAN puzzle

Hi All

Something strange that needs explaining. I configured an interface to a particular vlan 10 and it does not work but i change the vlan and it works.

I change the blade, the switch and still the same issue. As long as I put it in vlan 10, it will not work but put it in vlan 11 or 12 or any other vlan, it will work. What can be going wrong?

Thanks

4 REPLIES
Silver

Re: VLAN puzzle

Hi ,

Did you create Vlan 10 on the switch.Anything is connected in Vlan 10.

After creating Vlan 10 , you need to assign it to any port so that you can pulgin eitrher PC or Server in that Vlan.

As soon as you create vlan , it willn't comeup until unless something is placed in that Vlan.

Can you paste the "show run" of the switch.

Thanks,

satish

New Member

Re: VLAN puzzle

Thanks. There are a lot ofm devices already in vlan 10.

There are devices in all the vlans.

Thanks

Silver

Re: VLAN puzzle

Hi ,

Can you paste "show vlan " output.

What is the model of the switch.

Txs,

Satish

New Member

Re: VLAN puzzle

Thanks. I think the network was just being quirky. I came in the next day and all was fine. Strange. Thanks for your help. REally appreciate it. Cheers

115
Views
0
Helpful
4
Replies