Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VLAN setup WRV210 router?

I purchased the WRV210 router for the valn capability and configured it as 2-vlan with 1-ssid with 2-nic cards attached from Intel3210SH server running win2008v2 server running DHCP,DNS,AD and HYPER-V. Keep getting network errors on my static IP addresses. Server keeps changing 1-nic card back to dynamic ip address when trying to correct problem. Does document exist on router settings and server TCP/IP setting. I will then attempt to setup HYPER-V after the parent server is running correctly. Any help appreciated.

2 REPLIES
Bronze

Re: VLAN setup WRV210 router?

Go to the Setup page of the wrv210. On the sub-tab click on Vlan. Select enable on the Port-Based Vlan. Check the box of the desired vlan that you want to assign to the port and ssid.

New Member

Re: VLAN setup WRV210 router?

Thank you.

230
Views
0
Helpful
2
Replies