Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Vlan shutdown after power failure.

Hi Guys,

 

Please can you help me understand something? How can a vlan shutdown after the device lost power?

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Do you mean on SVI interface

Do you mean on SVI interface of VLAN - "interface vlan..." which is shut down?

If that's the case then - vlan not exist after lost power (config not saved), there is no interface (trunk or access belong to that VLAN) present in config (config not saved again).

If you mean that VLAN is lost - then config not saved :)

Exept from that I don't see any reason for loosing VLAN on your switch...beside that you have some HW failure or something like that (eg VLAN database corrupt because of flash or similar...).

BR,

Dragan

HTH, Dragan
1 REPLY
Silver

Do you mean on SVI interface

Do you mean on SVI interface of VLAN - "interface vlan..." which is shut down?

If that's the case then - vlan not exist after lost power (config not saved), there is no interface (trunk or access belong to that VLAN) present in config (config not saved again).

If you mean that VLAN is lost - then config not saved :)

Exept from that I don't see any reason for loosing VLAN on your switch...beside that you have some HW failure or something like that (eg VLAN database corrupt because of flash or similar...).

BR,

Dragan

HTH, Dragan
51
Views
0
Helpful
1
Replies