VLAN SLOWNESS between core switch and remote switch
I have issues with slowness when it comes to VLANS and switching.
I have a Core 3560 Switches that takes care of vlan and set as layer 3 switch\router
Fiber Trunk with encap dot1q
I have a Remote 3560 Switch that has VLAN 171 on the remote locations ports. This is a 10/100 Switch
When I try to ping From a pc that is attached to the switch, I do not drop packets but it is a slow ms ping times and we are having issues with database being slow. I have checked the PC plus checked for updates for the computer. But we still have the issue on all computers that are within the VLAN.
Here are the ping times that we were able to get from the Dell Comptuer
Reply from 192.168.XX.254 bytes=32 time=497ms TTL=64
Reply from 192.168.XX.254 bytes=32 time=387ms TTL=64
Reply from 192.168.XX.254 bytes=32 time=232ms TTL=64
Reply from 192.168.XX.254 bytes=32 time=674ms TTL=64
Reply from 192.168.XX.254 bytes=32 time=419ms TTL=64
Reply from 192.168.XX.254 bytes=32 time=35ms TTL=64
Reply from 192.168.XX.254 bytes=32 time=542ms TTL=64
This is a contants times between these switches and still have same issues.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...