Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Vlan Span to a port in 6513

whats the command to span entire vlan to a particular port. the IOS version is 12.2(18)SXD6. set commands doesnt work.

Thanks,

AJ

2 REPLIES
Cisco Employee

Re: Vlan Span to a port in 6513

Hi Aj,

Its an IOS to you have to use IOS base command and not set base command

Router(config)# monitor session local_span_session_number source {{single_interface | interface_list | interface_range | mixed_interface_list | single_vlan | vlan_list | vlan_range | mixed_vlan_list} [rx | tx | both]}}

Router(config)# monitor session local_span_session_number destination {single_interface | interface_list | interface_range | mixed_interface_list}

Have a look at this link

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/span.htm#wp1089465

HTH

Ankur

New Member

Re: Vlan Span to a port in 6513

Hi Ankur,

Yes. The answer solved the purpose. Thanks.

Regards,

AJ

192
Views
0
Helpful
2
Replies