Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

VLAN trunk and 802.11p

Hi all.

Is there anyway to configure 802.1p priority on a trunk port?

The configuration current running is like this:

interface fa0/0  # VLAN 34, untagged

  switchport mode access

  switchport access vlan 34

interface fa0/1 # VLAN 34, untagged

  switchport mode access

  switchport access vlan 35

Now I need to configure fa0/2 to connect both VLAN 34(tagged) and VLAN 35(tagged). Also, in VLAN 34, the 802.1p priority bits should be 4.

Is there anyway to do this?

Thanks in advanced.

Regards, Lingfeng Xiong
Everyone's tags (2)
251
Views
0
Helpful
0
Replies
CreatePlease to create content