If you are talking about the layer 3 SVI's then you can only have one active SVI (interface vlan X) . This is to manage the switch only so you can only have 1 active at a time. If it is some other issue please explain .
Is your concern that only vlan 1 is active and other vlans are automatically shutdown?
If yes that it is expected behavior because 2900XL switches are layer 2 switches and only one layer 3 interface can be active at a time just for management purpose other layer 3 interfaces will be shutdown automatically by an IOS.
If your concern is something else please come back.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...