In my company we are re-arranging the network and the servers, and a consultant is insisting to split our network to three V-lans using cisco SF 300-48P 48-Port 10/100 PoE Managed layer 3 switch as this:
1- Forefront TMG server
2- DC(AD,DNS,DHCP), ERP, File, servers
3- the rest of our workstations
i used the web access page to confegure the vlan's but i couldn't find a way to assaign IP address to Vlan port i searched a lot and read a lot of the posts and they mentioned changing the switch mode to layer 3 (https://supportforums.cisco.com/thread/2101074) but i cousint find this tap "Main Menu > System Mode>Layer 3"
os is there somthing wrong in my switch (i did a firmware upgrade to 22.214.171.124) or i'm doing it in the wrong way?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...