Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

vlan

hey i have 1 doubt

suppose if i created vlan for 5 pc's,and i want to multicast message from my 1st pc to 3rd n 4th pc only,i dont want to send that message to pc 2 n 5,is it possible in my created vlan or i have to create another one? if possible then tell me the procedure?waiting 4 reply

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: vlan

Hello,

As long as you enable IGMP snooping and PC 3 & 4 join the multicast group,

only they will get the data (on a multicast capable switch). If the switch

is not capable of handling multicast traffic, then it will treat it as

broadcast and all ports (or all PC's) will get the traffic.

Hope this helps.

Regards,

NT

2 REPLIES
Cisco Employee

Re: vlan

Hello,

As long as you enable IGMP snooping and PC 3 & 4 join the multicast group,

only they will get the data (on a multicast capable switch). If the switch

is not capable of handling multicast traffic, then it will treat it as

broadcast and all ports (or all PC's) will get the traffic.

Hope this helps.

Regards,

NT

Community Member

Re: vlan

Dear Gaurang,

          With the help of Private VLAN, we can  isolate the PC's in the same VLAN..

This following links will be helpful for configuring Private VLAN


http://www.cisco.com/en/US/tech/tk389/tk814/technologies_configuration_example09186a008017acad.shtml


http://cisco.biz/en/US/products/hw/switches/ps700/products_tech_note09186a008013565f.shtml


This will be helpful for configuring private VLAN.



Senthil

124
Views
0
Helpful
2
Replies
CreatePlease to create content