Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VLAN

Hi sir ,I have been completed my CCNA course,and I have a doubt on it,if you configure on switch with 4 VLAN and another switch with 3 VLAN and when you want to connect between the VLAN switches we use trunk port to communicate,am i wright,if it is wright how to configure the trunk port and where do you configure it ?and also I am attaching the diagram please verify and tell me send me the configuration of two diagrams?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: VLAN

Ajay,

AAASWITCH(config)#vlan 37

AAASWITCH(config-vlan)#exit

AAASWITCH(config)#vlan 50

AAASWITCH(config-vlan)#exit

AAASWITCH#show vlan

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

Fa0/5, Fa0/6, Fa0/7, Fa0/8

Fa0/9, Fa0/10, Fa0/11, Fa0/12

Fa0/13, Fa0/14, Fa0/15, Fa0/16

Fa0/17, Fa0/18, Fa0/19, Fa0/20

Fa0/21, Fa0/22, Fa0/23, Fa0/24

Fa0/25, Fa0/26, Fa0/27, Fa0/28

Fa0/29, Fa0/30, Fa0/31, Fa0/32

Fa0/33, Fa0/34, Fa0/35, Fa0/36

Fa0/37, Fa0/38, Fa0/40, Fa0/41

Fa0/42, Fa0/43, Fa0/44, Fa0/45

Fa0/46, Fa0/47, Fa0/48, Gi0/1

Gi0/2

30 VLAN30 active

35 VLAN35 active

37 VLAN0037 active

50 VLAN0050 active

101 VLAN0101 active

107 VLAN0107 active

1002 fddi-default act/unsup

1003 token-ring-default act/unsup

Regards,

~JG

4 REPLIES

Re: VLAN

Ajay,

Congrats for your CCNA.

On Switch 1 , choose any port that you want to connect to Switch2

Let says I take port 0/1

Switch one,2950

SWITCH(config)#interface fastEthernet 0/1

SWITCH(config-if)#switchport mode trunk

Switch Two, 2950

SWITCH(config)#interface fastEthernet 0/1

SWITCH(config-if)#switchport mode trunk

Your trunk port is ready.

Regards,

~JG

Please rate if helps

New Member

Re: VLAN

Hi ~JG ,

Thanks for your answer I have been satisfied and also want to know that one example of creating vlan ?please answer it.

Re: VLAN

Ajay,

AAASWITCH(config)#vlan 37

AAASWITCH(config-vlan)#exit

AAASWITCH(config)#vlan 50

AAASWITCH(config-vlan)#exit

AAASWITCH#show vlan

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

Fa0/5, Fa0/6, Fa0/7, Fa0/8

Fa0/9, Fa0/10, Fa0/11, Fa0/12

Fa0/13, Fa0/14, Fa0/15, Fa0/16

Fa0/17, Fa0/18, Fa0/19, Fa0/20

Fa0/21, Fa0/22, Fa0/23, Fa0/24

Fa0/25, Fa0/26, Fa0/27, Fa0/28

Fa0/29, Fa0/30, Fa0/31, Fa0/32

Fa0/33, Fa0/34, Fa0/35, Fa0/36

Fa0/37, Fa0/38, Fa0/40, Fa0/41

Fa0/42, Fa0/43, Fa0/44, Fa0/45

Fa0/46, Fa0/47, Fa0/48, Gi0/1

Gi0/2

30 VLAN30 active

35 VLAN35 active

37 VLAN0037 active

50 VLAN0050 active

101 VLAN0101 active

107 VLAN0107 active

1002 fddi-default act/unsup

1003 token-ring-default act/unsup

Regards,

~JG

New Member

Re: VLAN

hi ~JG ,

I got the good answer from u

Thanks

Ajay BHaradwaj K.N

126
Views
3
Helpful
4
Replies
CreatePlease to create content