09-08-2013 07:34 PM - edited 03-07-2019 03:21 PM
Hi,
We have a wireless controller that is connected to a switch port.
The wireless vlan for the ssid is vlan 101.
The switch port has native vlan put for this wlc.i want to know what vlan should we specifically allow on the switch trunk to wireless controller?
Is it only the wireless vlan or should it be also some data vlans.
Thanks in advance.
09-08-2013 07:40 PM
The switch port has native vlan put for this wlc.i want to know what vlan should we specifically allow on the switch trunk to wireless controller?
Allow the Management VLAN, AP Manager VLAN (if applicable) and the associated VLANs for the Dynamic Interfaces.
09-09-2013 12:54 AM
Thanks. So the vlans to be allowed will be vlan 101 (dynamic interface) , Vlan 5 ( management vlan).
If i understand correctly , there is no need to allow seperate non-wireless vlans that wireless users on this controller will be accessing.
Please comment if this is not correct.
09-09-2013 05:19 PM
If i understand correctly , there is no need to allow seperate non-wireless vlans that wireless users on this controller will be accessing.
For security purposes, you only allow VALID VLANs. This is more so with wired VLAN.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide