Can anyone point me in the direction of some examples of VLAN equipment 3550ish switches and a PIX firewall.
I've been trying to ping my firewalls from the inside of my VLAN and from the firewall to the inside of the VLAN and getting know where. I can ping from firewall to the routing port on the 3550. I'm using a /30 address from the PIX e1 to the routing port f0/1 on the 3550. But trying to ping from the other VLANs to e1 address or connecting through telnet from a VLAN to PIX is not working. I dont have any ACLs on the 3550. The PIX has ACLs on the e0 outside interface but not on the inside.
If its easier I can post the configs. this is my first going into production VLAN and it not going like the labs I've done.
that was killing me. I was thinking because I had previously had the 192.168.1.0/24 network that I would not need it the route. But the interface was previously in the class range. I changed it to be a /30 and it didn't know what to do.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...