IPT network with 2801s and 3560s. My VAR setup VLAN6 for phone traffic, and VLAN9 for "mgt traffic". (VLAN1 is still active as the default so I imagine most of the Cisco info traffic is still moving about on VLAN1).
Anyways, I have some devices that I have to telnet into with a 6 addy, and others with a 9. All of the 2801s have a vlan6 but no 9. The 3560s have a vlan9 but no 6. You get the idea!
Trivial, but I always find myself typing in the wrong addy when I try to telnet to one of the boxes.
Should I give them all a vlan6 addy or all a vlan9 addy or both? How many use a separate vlan for "mgt traffic"?
Using a management vlan is very common and is a good idea. What I would do is leave the switch management in vlan 9 and instead of accessing the routers with the vlan 6 ip address, put a loopback on the routers that belongs in vlan 9 ip address space.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.