Let me try to explain the steps and see if this helps you
You build the database first and load it on any tftp server in a text file in ASCII format and then on your switch which you want to work as VMPS server point to TFTP server so that it can download that file from tftp server after enabling VMPS on that switch.
Then login to the switches which you want to work as VMP client and on that switch point the ip address of VMPS server so that when client connect to the dynamic port this switch can redirect the request to VMPS server
Now on the switches which you configured for VMPS client you will connect any machine on ports. We generally configure "switchport mode access" and then give the vlan number for that port but because VMPS is dynamic you have to configure switchport membership as dynamic
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.