07-19-2007 02:15 AM - edited 03-07-2019 12:26 AM
Hello,
Can someone explain why VMPS reconfirms more than configured ?
03:26:59: %VQPCLIENT-7-RECONF: Reconfirming VMPS responses
03:26:59: VQPC: Set needReconfirm. Total ReconfirmPending:1
03:26:59: VQPC PAK: xmt transaction ID = 0x00000019
03:26:59: VQPC PAK: sending query to VMPS
03:26:59: VQPC: Started throttle timer, Pkt Sent:1, Pending:0
03:26:59: VQPC PAK:
03:26:59: VQPC PAK: rcvd packet from VMPS
03:26:59: VQPC PAK: transaction ID = 0x00000019
03:26:59: VQPC: rcvd response, transID = 0x00000019
03:26:59: VQPC PAK: VLAN name TLV, vlanName = default
03:26:59: VQPC PAK: Cookie TLV, cookie = 000b.cde3.855f, length = 6
03:27:00: VQPC: Finished Reconfirmation
03:27:00: VQPC: Starting reconfirm timer again!
03:27:45: VQPC PAK: xmt transaction ID = 0x0000001A
03:27:45: VQPC PAK: sending query to VMPS
03:27:45: VQPC PAK:
03:27:45: VQPC PAK: rcvd packet from VMPS
03:27:45: VQPC PAK: transaction ID = 0x0000001A
03:27:45: VQPC: rcvd response, transID = 0x0000001A
03:27:45: VQPC PAK: VLAN name TLV, vlanName = default
03:27:45: VQPC PAK: Cookie TLV, cookie = 000b.cde3.855f, length = 6
03:38:56: VQPC PAK: xmt transaction ID = 0x0000001B
03:38:56: VQPC PAK: sending query to VMPS
03:38:56: VQPC PAK:
03:38:56: VQPC PAK: rcvd packet from VMPS
03:38:56: VQPC PAK: transaction ID = 0x0000001B
03:38:56: VQPC: rcvd response, transID = 0x0000001B
03:38:56: VQPC PAK: VLAN name TLV, vlanName = default
03:38:56: VQPC PAK: Cookie TLV, cookie = 000b.cde3.855f, length = 6
03:45:26: VQPC PAK: xmt transaction ID = 0x0000001C
03:45:26: VQPC PAK: sending query to VMPS
03:45:27: VQPC PAK:
03:45:27: VQPC PAK: rcvd packet from VMPS
03:45:27: VQPC PAK: transaction ID = 0x0000001C
03:45:27: VQPC: rcvd response, transID = 0x0000001C
03:45:27: VQPC PAK: VLAN name TLV, vlanName = default
03:45:27: VQPC PAK: Cookie TLV, cookie = 000b.cde3.855f, length = 6
NOTE: THE SWITCH IS CONNECTED TO ANOTHER SWITCH. WHEN IT RUNS 'stand alone', EVERYTHING SEEMS TO WORK. WHY ?
07-26-2007 06:27 AM
I think reconfirm vmps command is use to reconfirm the current dynamic port VLAN membership with VMPS. VMPS clients periodically reconfirm the VLAN membership information received from the VMPS. For more information on VMPS please click following URL:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide