It is possible to configure vPC between a N7K and N5K in a scenario such that you have two N7Ks which are essentially your vPC peer devices which in turn are uplinked to the same N5K. The physical interfaces on the both N7Ks will be configured as members of a given port-channel group with the identical vPC identifier thus creating the vPC.
The respective interfaces on the N5K will be configured as port-channel members only, and will therefore form an etherchannel with the N7Ks. Neither of the interfaces will have a dependancy on STP as they will be both forwarding.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...