Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

vPC on Nexus 7k - Compatibility

If I try to enable vPC on N7k, this message appear:

"vPC enable status: Incompatible hardware not enabling vPC"

What does it mean? NX-OS & EPLD version 4.1(3)

1 REPLY

Re: vPC on Nexus 7k - Compatibility

This message most likely means you have a 48 port 1-Gig line card (N7K-M148GT-11) that has hardware version of below 1.3, anything below this hardware version will generate this message when you attempt to enable the vpc feature. This line card is not supported with vPC, you can either power that down or get an RMA for a line card with the right HW version.

Here is a snippet of the release notes on 4.1.3 and vPC:

If you are attempting to configure the vPC on an incorrect version of the N7K-M148GT-11 module, the screen displays an error message. Contact your Cisco Account Team if you see this message.

http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os/release/notes/41_nx-os_release_note.html#wp169934')">http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os/release/notes/41_nx-os_release_note.html#wp169934')">http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os/release/notes/41_nx-os_release_note.html#wp169934')">http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os/release/notes/41_nx-os_release_note.html#wp169934

326
Views
0
Helpful
1
Replies