cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
607
Views
0
Helpful
1
Replies

VPMS Questions

lhoyle
Level 1
Level 1

I have a PDF that details this concept fairly well, except all of the example switches are Cats. Are any IOS switches able to be VMPS servers? It appears they all could be VMPS clients.

TIA,

Lee

1 Accepted Solution

Accepted Solutions

Amit Singh
Cisco Employee
Cisco Employee

Lee,

VMPS server is not supported on IOS switches. Its only supported on CatOS switches and there are no plans to support it on IOS.

However, if you are looking for dynamic vlan assignment, you can use IEEE 802.1x feature on the switchports and have the ACS assign the dynamic vlan based on the user-ID's.Please see the link below for more info:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_2_31a/config/dot1x.htm

HTH,Please rate if it does.

-amit singh

View solution in original post

1 Reply 1

Amit Singh
Cisco Employee
Cisco Employee

Lee,

VMPS server is not supported on IOS switches. Its only supported on CatOS switches and there are no plans to support it on IOS.

However, if you are looking for dynamic vlan assignment, you can use IEEE 802.1x feature on the switchports and have the ACS assign the dynamic vlan based on the user-ID's.Please see the link below for more info:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_2_31a/config/dot1x.htm

HTH,Please rate if it does.

-amit singh

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: