Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VPN 3000 and mem upgrade

I have two VPN concentrators that I upgraded the memory to 512M. Also, I update the software to latest release (Jun 2006). One of them was able to see the RAM ? 512M- right away and the other one was not. It was only seeing 256M (2x256M). I have did almost everything possible. I place the RAM in different slots, reseated, and so on. Then, I took the RAM that was actually working and place into the second one and it did not work. The same problem ? seeing only 256M.

Any thought? Thank you in advance?

bz

1 REPLY
Silver

Re: VPN 3000 and mem upgrade

Before upgrading the RAM update the VPN Concentrator software image to Version 4.0 or higher, update VPN Concentrator bootcode to Version 4.0 or higher. Refer the following URL

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/prod_module_install_config_guide09186a008015ce0b.html#wp1016842

181
Views
0
Helpful
1
Replies