Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

paa
New Member

VPN Client and routing

Hi!

I have a strange problem with VPN Client and routing.

[local-A]-[2811]-----[ISP]-----[PC-Win]-[local-B]

My PC with Windows connect from remote office to 2811 by VPN Client. So, from PC I can access local-A behind 2811 and local-B. This PC is a default gw for local-B network.

So, I have a problem - other PCs in local-B networ cann't access PCs in local-A. On Windows router (local-B) I see a route to local-A through VPN, but it's not work! Also I try to add route on 2811 to local-B through 10.0.0.1 (it is ip-address of my VPN-client connection) but it not helped

My config (only main part):

local-A -- 192.168.0.0/24

local-B -- 192.168.1.0/24

!

crypto isakmp client configuration group test

key test_12_vpn

pool VPN-CLIENT

acl VPN-ACL

!

crypto dynamic-map vpn_dn_map 10

set transform-set TRANS

reverse-route

!

crypto map VPN 5 ipsec-isakmp dynamic vpn_dn_map

!

!

ip local pool VPN-CLIENT 10.0.0.1

ip route 192.168.1.0 255.255.255.0 10.0.0.1

!

ip access-list extended VPN-ACL

permit ip 192.168.0.0 0.0.0.255 host 10.0.0.1

permit ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255

!

1 REPLY
Silver

Re: VPN Client and routing

Please use this Configuration guide for your VPN configuration.

http://www.cisco.com/en/US/products/ps5854/tsd_products_support_configure.html

226
Views
0
Helpful
1
Replies
CreatePlease to create content