Hi all, has anyone seen this before, I can vpn into my work place from home fine, when I give access to another company, they can connect to the vpn, they get a dhcp address etc, but when they try to ping the device i gave them access to, it does not work, but it works if i use the same account from home, any ideas what this could be ?
It may have various reason either on client and server side. I had similar problem. One possible problem is the ip address assigned by the vpn server is filtered somewhere else by acl. Other reason can be the client is not working successfully. For instance when I used VPN client on XP somehow it was not able to add route to the PC's route table when connected to the VPN server.
Let's check the VPN client's log or make some ip packet debug on the VPN server.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...