Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN/RDP problemS

hi,

forgive me for my poor english and happy new year all !!

here my problem :

LAN1==Server2003RDP1==1Cisco831----Internet----2Cisco831==Server2000RDP2==LAN2

I can use RDP between the two server without pb, I can use RDP between LAN2 and RDP1

but i can't use RDP between lan1 and RDP2.

I used the ping -f -l command to troobleshoot and i enter on the 1cisco the command:

crypto ipsec df-bit clear and then i can use rdp between lan1 and RDP2 but the rdp between

LAN2 and RDP1 now dont works (but the RDP between serveur works in the 2 direction).

i am looking for a "simple" description of what to do when their are MTU problem (because i think its

mtu problem here) in a L2L VPN. i mean do :

ping XXX.XXX.XXX.XXX -l 1460 -f

and

ping XXX.XXX.XXX.XXX -l 1450 -f

When the ping reply :

ip mtu XXXX (does it help ? on what interface ?)

or

ip tcp adjust-mss XXX (does it help ? on what interface ?)

I don't knows if i have been clear, thanks for help

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: VPN/RDP problemS

On Cisco routers, use the ip mtu command to adjust the MTU size on the interface where the VPN is terminated. On ASA/PIX devices, use the mtu command to adjust the MTU size in global config mode. Following links may help you

http://www.cisco.com/en/US/products/hw/routers/ps4081/products_tech_note09186a0080094268.shtml

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008081e621.shtml

1 REPLY
Silver

Re: VPN/RDP problemS

On Cisco routers, use the ip mtu command to adjust the MTU size on the interface where the VPN is terminated. On ASA/PIX devices, use the mtu command to adjust the MTU size in global config mode. Following links may help you

http://www.cisco.com/en/US/products/hw/routers/ps4081/products_tech_note09186a0080094268.shtml

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008081e621.shtml

131
Views
4
Helpful
1
Replies