Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vpt set to transparent and need to change to client

I have a old c3500xl, running ios version -c3h2s-mz.120-5.WC16.bin

How can I change the vtp operation mode from transparent to client.

from the ios I don't see how to setup to client mode.

i.e.

SW2#conf t

Enter configuration commands, one per line. End with CNTL/Z.

SW2(config)#vtp ?

file Configure IFS filesystem file where VTP configuration is stored.

Never used a FILE???

Please help,

yanic

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: vpt set to transparent and need to change to client

SWINFOR_1#vlan database

% Warning: It is recommended to configure VLAN from config mode,

as VLAN database mode is being deprecated. Please consult user

documentation for configuring VTP/VLAN in config mode.

SWINFOR_1(vlan)#vtp ?

client Set the device to client mode.

domain Set the name of the VTP administrative domain.

password Set the password for the VTP administrative domain.

pruning Set the administrative domain to permit pruning.

server Set the device to server mode.

transparent Set the device to transparent mode.

v2-mode Set the administrative domain to V2 mode.

SWINFOR_1(vlan)#vtp cli

SWINFOR_1(vlan)#vtp client

SWINFOR_1(vlan)#?

VLAN database editing buffer manipulation commands:

abort Exit mode without applying the changes

apply Apply current changes and bump revision number

exit Apply changes, bump revision number, and exit mode

no Negate a command or set its defaults

reset Abandon current changes and reread current database

show Show database information

vlan Add, delete, or modify values associated with a single VLAN

vtp Perform VTP administrative functions.

SWINFOR_1(vlan)#apply

SWINFOR_1(vlan)#exit

"Done"

2 REPLIES
bjw Silver
Silver

Re: vpt set to transparent and need to change to client

New Member

Re: vpt set to transparent and need to change to client

SWINFOR_1#vlan database

% Warning: It is recommended to configure VLAN from config mode,

as VLAN database mode is being deprecated. Please consult user

documentation for configuring VTP/VLAN in config mode.

SWINFOR_1(vlan)#vtp ?

client Set the device to client mode.

domain Set the name of the VTP administrative domain.

password Set the password for the VTP administrative domain.

pruning Set the administrative domain to permit pruning.

server Set the device to server mode.

transparent Set the device to transparent mode.

v2-mode Set the administrative domain to V2 mode.

SWINFOR_1(vlan)#vtp cli

SWINFOR_1(vlan)#vtp client

SWINFOR_1(vlan)#?

VLAN database editing buffer manipulation commands:

abort Exit mode without applying the changes

apply Apply current changes and bump revision number

exit Apply changes, bump revision number, and exit mode

no Negate a command or set its defaults

reset Abandon current changes and reread current database

show Show database information

vlan Add, delete, or modify values associated with a single VLAN

vtp Perform VTP administrative functions.

SWINFOR_1(vlan)#apply

SWINFOR_1(vlan)#exit

"Done"

139
Views
0
Helpful
2
Replies
CreatePlease login to create content