Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VRF issue with CLI 'no logging host '

Hi,

I want to delete by CLI an VRF aware configuration, when i type "no logging host 10.1.1.1 vrf toto" the L3 switch says'ambigus command' but when I try with the cisco preconisations and type 'no logging host 10.1.1.1 ' there an other message 'logging host not found' and the command is not deleted, ever the ping 10.1.1.1 is OK.

IS it a bug (catalyst 4507R IOS 12.2.25EWA)or the an other plan to delete this command.

thanks bests regards

Omar

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: VRF issue with CLI 'no logging host '

Omar,

What you are experiencing is a bug, documented in BUG ID CSCek33573.

Please refer the below release notes for details:

http://www.cisco.com/en/US/products/ps6021/prod_release_note09186a00807551fe.html

According to the release notes, the bug is fixed in 12.2(25)EWA6.

I hope the above information helps.

Regards,

Arul

** Please rate all helpful posts **

2 REPLIES
Silver

Re: VRF issue with CLI 'no logging host '

The logging command identifies a syslog server host to receive logging messages. The host argument is the name or IP address of the host. By issuing this command more than once, you build a list of syslog servers that receive logging messages. The no logging command deletes the syslog server with the specified address from the list of syslogs.

Cisco Employee

Re: VRF issue with CLI 'no logging host '

Omar,

What you are experiencing is a bug, documented in BUG ID CSCek33573.

Please refer the below release notes for details:

http://www.cisco.com/en/US/products/ps6021/prod_release_note09186a00807551fe.html

According to the release notes, the bug is fixed in 12.2(25)EWA6.

I hope the above information helps.

Regards,

Arul

** Please rate all helpful posts **

147
Views
0
Helpful
2
Replies