Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vrf type setup on 6500/720 routing vlans to different gateways

very simple.

many many vlans route properly out the default gateway to the internet.

I have a few vlans that I want to direct out a different nat'ed vlan to a dsl isp. They need to be totally isolated from the rest of the internal network. there is no firewall interfaces.

vrf aware nat doesnt work on sup720's :(

so how best can I tell one vlan to only route to this vlan then have that vlan nated with overload.

i am stuck.....

Thanks EXPERTS!

1 REPLY
New Member

Re: vrf type setup on 6500/720 routing vlans to different gatewa

We could configure Vlan Access List on the switch so that only specific vlans communicate.Refer URL

http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_reference_chapter09186a00801eaeec.html#wp999419

134
Views
0
Helpful
1
Replies
CreatePlease to create content