Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VSS 6509E

Gents

i am deploying VSS and have follwoing equipment

cisco 6509E

Dual redudnant VS-S2T-10G

I have also ordered WS-X6908-10G-2T card for floor swicthes uplink

can someone pelase tell me how i shd do the cabling for VSS (between two switches)

Thanks heaps

3 REPLIES
Hall of Fame Super Gold

Re: VSS 6509E

1.  You need a VSS heartbeat link.  Recommend you use 1Gbps fibre.

2.  For VSS link, you can use the supervisor's on-board 10 Gbps link and/or combine with 6908 10 Gbps ports.

VIP Super Bronze

VSS 6509E

Hi,

Also, have a look at figure 4-5 in this link for VSL connectivity with quad sups.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html

HTH

Cisco Employee

VSS 6509E

Hi Guroo,

You need a Tengig connection from each supervisor module on one chassis to other chassis. Only Tengig connections can be used as VSL links.

Thanks & Regards,
Karthick Murugan
CCIE#39285

Thanks & Regards, Karthick Murugan CCIE#39285
117
Views
0
Helpful
3
Replies
CreatePlease to create content