Hi, We are using WS-SUP32-10GE-3B for our 6509 switch. Wht I understand is it does not support VSS. So I need SUP720 to configure VSS. Can you let me know whether line cards are required along with SUP720.
Hi, Thanks for the reply..I have the below hardware for two of the 6513 switches on which I will be configuring VSS. Can u let me know if any other hardware along with SUP720 needs to be added to configure VSS? Also can it be configured with IOS 12.2(18)SXF?
2 WS-C6513-S32-10GE Cat6513 chassis, WS-SUP32-10GE-3B, Fan Tray (req. P/S)
2 WS-SUP32-10GE-3B Cat 6500 Supervisor 32 with 2 ports 10GbE and PFC3B
2 S323IBK9M-12218SXF Cisco CAT6000-SUP32 IOS IP BASE SSH (MODULAR)
4 MEM-C6K-CPTFL512M Catalyst 6500 Sup720/Sup32 Compact Flash Mem 512MB
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...