To be honest, I have never seen this deployed in the field, but then again you do not generally see VSS and N7K vPC deployed as parallel access switches. Normally you would use them in different locations, so would have the ESX box channeled to either the N7Ks or the VSS chassis
It would in theory work, but keep in mind that by dual homing your ESX boxes to both the VSS and the N7K you increase the complexity of the forwarding path and potential future troubleshooting. The other thing is with active/active, it will work providing you use MAC pinning on your N1K/VSwitch, however if you ended up with a loop on your ESX box you have the potential for introducing a network down. Active standby would not have this limitation, but you obviously lose useable bandwidth doing so.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.