I am currently constructing a network design and plan to use VSS, I am quite new to VSS and so far I have only read about it. Thus before including it in my project plan I would like to conduct a test/lab between a 3750 & a 3750x but am not sure if having a different model switch would allow the VSS to form?
In the actual implementation I plan to use two stand along 3750x but I would first like to see if it works in my lab. If having a different model switch is not doable I will get another 3750 just to be sure...
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...