We need to swap out a 6513 chassis to a 6509E to accommodate a ASA-SM.
Is there anything special required on the VSS side that I need to know during the chassis swap?
The other VSS partner is a 6509E and will be active during the chassis swap.
The running config of the VSS will be substantially changed by the introduction of the 9 slot chassis. I have done chassis swaps before and had to manually edit the configuration after the reload to populate the slots and port information. I was just wondering if there is any caveats I should be aware of.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.