Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

VSS different chassis

Hi all. Is it posiible to make VSS with chassis Cat 4507R+E and Cat 4507R-E with the same supervisors and same linecards?

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

VSS different chassis

From the 4500 configuration guide -

Chassis

  2

VSS is available on a Catalyst 4500-X switch and on chassis that support Supervisor Engine 7-E and Supervisor Engine 7-LE.

Note The two chassis must have the same number of slots. However, +E and -E chassis can be mixed.

full link -

http://www.cisco.com/en/US/customer/docs/switches/lan/catalyst4500/15.1.2/XE_340/configuration/guide/vss.html#wp1053927

Jon

2 REPLIES
Hall of Fame Super Blue

VSS different chassis

From the 4500 configuration guide -

Chassis

  2

VSS is available on a Catalyst 4500-X switch and on chassis that support Supervisor Engine 7-E and Supervisor Engine 7-LE.

Note The two chassis must have the same number of slots. However, +E and -E chassis can be mixed.

full link -

http://www.cisco.com/en/US/customer/docs/switches/lan/catalyst4500/15.1.2/XE_340/configuration/guide/vss.html#wp1053927

Jon

New Member

Hi

Hi

How about Supervisor 8E and Supervisor 7E or 8L-E. As last time we bought 1x 4503-E with Sup8E, this year we will buy 1 more for redundancy, but we want to reduce the cost, so we want to buy Sup7E or 8L-E. So I wonder if either Sup7E/Sup8L-E can do VSS with SUP-8E

467
Views
5
Helpful
2
Replies
CreatePlease to create content