Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

VSS Phase 2 on WS-C4507R+E with sup WS-X45-SUP7L-E

Hi All,

I was wondering if anybody knows whether the latest IOS package, namely

IOS XE 3.5.0E and SW Release15.2(1)E

supports VSS Phase 2 with the equipments as mentioned in the subject. Specifically, I'm looking to utilize fast hellos as DAD instead of epagp. I can't seem to find a definite info from the release notes:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_29984-01.html#wp2692074

It does say 4500-x series supports it with the new IOS XE but there isn't anything, which talks about the E series. Or maybe it has been too long a day for me.

Is there any kind souls who could let me know?

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Green

VSS Phase 2 on WS-C4507R+E with sup WS-X45-SUP7L-E

Darren,

Try these release notes 4500E table 5 Duplicate Address Detection

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_29985-01.html#wp2634711

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
1 REPLY
Green

VSS Phase 2 on WS-C4507R+E with sup WS-X45-SUP7L-E

Darren,

Try these release notes 4500E table 5 Duplicate Address Detection

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_29985-01.html#wp2634711

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
457
Views
0
Helpful
1
Replies
CreatePlease to create content