cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1424
Views
0
Helpful
2
Replies

VSS with Line cards 6148 Question

ajinc
Level 1
Level 1

Dears,

I am facing a problem with 6509-E in VSS enviorment. After the VSS configurations the line cards are not coming up.

Supervisior : VS-S720-10G Line cards: WS-X6148A-GE-TX , It says unsupported modules found in slots.

I have seen some docs says these line crds may not be supported, Does anyone have any Idea/ Docs on this ? Any workarounds to overcome this situation ??

Thanks in advance..

Aji N C

2 Replies 2

francisco_1
Level 7
Level 7

Someone has posted same question.

please see for answer to your question https://supportforums.cisco.com/message/3037087#3037087.

You need to have the right supported hardware for VSS. No workaround

Francisco

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Aij,

they are not supported for sure, only 67xx series linecards can be used on VSS

see

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html#wp1053927

Edit:

Francisco, you are right it is exactly the same question.

Hope to help

Giuseppe

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco