Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

VSS with Line cards 6148 Question

Dears,

I am facing a problem with 6509-E in VSS enviorment. After the VSS configurations the line cards are not coming up.

Supervisior : VS-S720-10G Line cards: WS-X6148A-GE-TX , It says unsupported modules found in slots.

I have seen some docs says these line crds may not be supported, Does anyone have any Idea/ Docs on this ? Any workarounds to overcome this situation ??

Thanks in advance..

Aji N C

Everyone's tags (3)
2 REPLIES

Re: VSS with Line cards 6148 Question

Someone has posted same question.

please see for answer to your question https://supportforums.cisco.com/message/3037087#3037087.

You need to have the right supported hardware for VSS. No workaround

Francisco

Hall of Fame Super Silver

Re: VSS with Line cards 6148 Question

Hello Aij,

they are not supported for sure, only 67xx series linecards can be used on VSS

see

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html#wp1053927

Edit:

Francisco, you are right it is exactly the same question.

Hope to help

Giuseppe

1246
Views
0
Helpful
2
Replies
CreatePlease to create content