Error Message: SPANTREE-2-LOOPGUARDBLOCK: No BPDUs were received on port [chars] in [chars] [dec]. Moved to loop-inconsistent state
Explanation: This message indicates that due to a unidirectional link failure, or failure of a bridge, BPDUs are not being received on the port. Loopguard has blocked the port to prevent loops.
Check the bridge connected to this port and test the link for any unidirectional failures. Sometimes excessive delay between BPDUs can trigger this event. If this is the case, no action is required because the port state is restored with the arrival of the next BPDU.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...