Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

vtp client not updated

Hiiii

vtp client is not updated from vtp server inspite of having same domain name and lower revision configuration no. of client. could not understand what is the issue...

ur suggestion will be highly appreciated..

regards,

amit

10 REPLIES

Re: vtp client not updated

Hello, is the trunk UP? Also chk if there is a password configured for vtp domain. Assuming the other switch is configured as client & not transparent.

Community Member

Re: vtp client not updated

Hiii, yes the trunk is on and there is no password configured and other switch is in server name.its only one switch in client mode which is not updated by server others are getting updated..any thoughts

Re: vtp client not updated

Try stripping out the vtp domain name and re inputting it.

Community Member

Re: vtp client not updated

already tried this resulting the config revision no. to 0.bt still its not updating

Re: vtp client not updated

Hi

Try making a new vlan on the server and deleting it to generate a couple of updates, and see if that makes any difference.

Martin

Re: vtp client not updated

can we see the show vtp status on both switches?

Community Member

Re: vtp client not updated

sure for ur convinience i am posting the output of show vtp staus command for server n client switches.

for server switch-

VTP Version : 2

Configuration Revision : 16

Maximum VLANs supported locally : 1005

Number of existing VLANs : 16

VTP Operating Mode : Server

VTP Domain Name : CORE

VTP Pruning Mode : Disabled

VTP V2 Mode : Disabled

VTP Traps Generation : Disabled

MD5 digest : 0xA2 0x49 0x7F 0xEB 0x52 0xF5 0x4F 0xE0

Configuration last modified by 10.101.43.1 at 3-2-93 21:31:25

for client switch-

sh vtp status

VTP Version : 2

Configuration Revision : 1

Maximum VLANs supported locally : 128

Number of existing VLANs : 15

VTP Operating Mode : Client

VTP Domain Name : CORE

VTP Pruning Mode : Disabled

VTP V2 Mode : Disabled

VTP Traps Generation : Disabled

MD5 digest : 0xFA 0x3F 0x7B 0xB9 0x05 0x94 0xD8 0xBB

Configuration last modified by 10.101.43.5 at 4-13-93 02:22:38

Re: vtp client not updated

This looks ok. have you run a debug to chk vtp synchronisation?

Community Member

Re: vtp client not updated

can u plz suggest the appropriate commands to do this...

Re: vtp client not updated

not sure, but try this...

debug sw-vlan vtp

366
Views
0
Helpful
10
Replies
CreatePlease to create content