I had a couple of questions. I want to be able to load a 3560 switch with a configuration from a CD through a TFTP server. It seems that in order to do this I need to give the router an IP address first. Does anyone know how I can load this without having to set anything in config.
Also, it seems that the config file has everything I need except for VTP info. Can anyone tell me what file in flash has VTP info. Thanks for the help.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...