Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VTP Configuration Issue

I have configued My cisco 3750 switch new switch as VTP client and given proper vtp domain and password and save the config.

but when i reboot switch if see the configuration of VTP it came back to VTP SERVER MODE ....

why this is happening...

4 REPLIES

Re: VTP Configuration Issue

u loss only this point or every config u made u loss ?

New Member

Re: VTP Configuration Issue

only this configuration

other configuration is ok;

Re: VTP Configuration Issue

Hi Jitendra,

Can you describe how you saved the config, what commands you used, etc.

Cheers:

Istvan

Hall of Fame Super Silver

Re: VTP Configuration Issue

Hello Jitendra,

be aware that this kind of switch have two different places where to configure/store VTP config: the nvram:startup-config and the flash:vlan.dat.

The first is accessed from configure terminal the second is the vlan database and is accessed from privilege mode using

vlan or vlan database

You have probably changed the config in the startup-config then the vlan.dat file is read and vtp config is overwritten

(or it is the opposite: there are no details of your VTP config)

Hope to help

Giuseppe

129
Views
0
Helpful
4
Replies