Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

VTP domain zero + server and transperant setup

Hi All ,

I have configiured 3750 switch as a server and domain name is zero i mean domain is not configured.

I have connected 2950 switch which is transperant switch  to 3750 switch and configured default gateway which is the vlan 1 ip of 3750 switch.

3750 switch config :

-----------------------------

vtp mode server

ip routing

int vlan 1

10.1.1.1 255.255.255.0

no shut

int gig 1/0/1

switchport mode trunk

switchport trunk enacapsulation dot1q

no shutdown

2950 switch config

-----------------------------

vtp mode transperant

int vlan 1

ip address 10.1.1.2 255.255.255.0

no shut

ip default-gateway 10.1.1.1

int f0/0

switchport mode trunk

switchport trunk enacapsulation dot1q

no shutdown

When I try to ping to gateway ip 10.1.1.1 from 2950 switch , its not pinging.

what could be the problem ...

Thanks ,

M S K

Thanks ,
M S K       

Thanks , M S K
Everyone's tags (2)
1 REPLY

VTP domain zero + server and transperant setup

If you run 'show ip int trunk', does it show that the trunk port is up between the 2950 and 3750, on ports gi1/0/1(3750_ and f0/0(2950)

Also, can you post the ping command that you are testing this on?

137
Views
0
Helpful
1
Replies
CreatePlease to create content